Digilogics | Etiquetas de RFID

Confidex Silverline Blade

PRODUCT DATASHEET

Global on metal label with extreme performance.

ELECTRICAL SPECIFICATION

Device type
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000-6C
Operational frequency
Global 865 – 928 MHz
IC type
Impinj Monza R6TM
Memory configuration
EPC 96 bit; TID 96 bit with 48 bit serial number
EPC memory content
Unique number encoded as a default
Read range (2W ERP)*
On metal up to 4,5 m / 15 ft
On Plastic up to 1,5 m / 5 ft
Liquid containers up to 3 m / 10 ft
Applicable surface materials*
All surfaces, optimized for metal
Attachment on curved surface*
Label can be attached on a curved surface. Check
installation instructions for more details.


* Read ranges are theoretical values that are calculated for non-reflective
environment. Different surface materials may have an effect on
performance.

MECHANICAL SPECIFICATION

Label surface
White specially coated PP with good printability. Zebra
5095 resin ribbon recommended.
Background adhesive
High tack adhesive with excellent adhesion to all surfaces
including low surface energy plastics.
Weight
0,6 g
Delivery format
500 pcs good labels on reel, bad ones marked with “XXX”
printing. Typical yield >95%.
Pitch on reel
30,48 mm / 1.2”
Reel core inner diameter
76 mm / 3”
Tag dimensions
60 x 25 x 1.2 mm / 2.36 x 0.98 x 0.047”

ENVIRONMENTAL RESISTANCE

Operating temperature
-35°C to +85°C / -31°F to +185°F
Peak temperature
+110°C / 230°F for 10min
Ambient temperature
-35°C to +85°C /-31°F to +185°F
Water resistance
IP68, tested for 5 hours in 1m deep water
Washing resistance
Tolerates industrial washing with standard solvents.
Washing process should be tested in final application.
Chemical resistance
No physical or performance changes in:
• 168h Sulfuric acid (10%, pH 2) exposure
• 168h Motor oil exposure
• 168h Salt water (salinity 10%) exposure
• 30min NaOH (10%, pH 13) exposure
Acetone should be avoided
Storage condition
1 year in +20°C / 50% RH


Environmental values are the best recommendations; resistance against
different conditions depends on the combination of all influencing factors,
exposure duration and chemical concentrations. Thus, product’s final
suitability for certain environmental conditions is recommended to be
tested.

RADIATION PATTERNS

INSTALLATION INSTRUCTIONS

When attaching the label

ensure the following
• Select a smooth surface without uneven areas
below tag
• Avoid touching the background adhesive and IC
location


When mounting the label with its adhesive, clean and dry
the surface for obtaining the maximum bond strength.
Typical cleaning solvents are heptane or acetone for oily
surfaces or isopropyl alcohol for plastics. Do not use
household cleaning solvents that contain oils. Carefully
read and follow the manufacturer’s precautions and
directions for use when working with solvents.


Ideal application temperature is from +21°C to +38°C
(+70°F to +100°F). Bond strength can be improved with
firm application pressure and moderate heating up to
+54°C (+130°F). Application at temperatures below 10°C
(50°F) is not recommended.


Optimal read range is achieved when label is attached
close to the edge of metal asset, like shown in below
picture.

Smallest recommended bending diameter of the Confidex
Silverline Blade™ is 100mm. For optimal performance
please bend the label in the orientation shown below.

PRINTER COMPATIBILITY

The Confidex Silverline family is designed and verified to
work with the Custom Zebra ZT410 RFID Silverline printer.
Other Zebra printers are not recommended or supported.
Contact your Authorized Zebra Reseller for ordering
information.


Set-up instructions and printer configurations specifically
for Silverline tags and the Custom ZT410 RFID Silverline
printer is available on Zebra.com or by contacting Zebra
Technical Support.

ORDER INFORMATION

Zebra part number: 10028598
Product name: Confidex Silverline BladeTM MR6


For additional information and technical support, please
contact your Authorized Zebra Reseller or Zebra Technical
Support.

DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH, CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO
THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS PROVIDED IN CONFIDEX STANDARD
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO EVENT BE RESPONSIBLE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES DESCRIBED
HEREIN.

Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
under end-use conditions. Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.